Molds & Tooling
4 조회수
PPO Glass Fiber Grade Warpage
문제 현상
[Problem Phenomenon] Warpage of glass fiber reinforced PPO products, poor dimensional assembly
원인 분석
Fiber orientation makes shrinkage anisotropic, and gate position determines the orientation distribution; uneven cooling superimposed with orientation differences causes warpage; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Optimize gate position to homogenize fiber orientation; uniform mold temperature; use low-warpage grades (HS2000, etc.) for warpage-sensitive parts; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
The root of PPO glass fiber warpage is orientation, and gate design is the first adjustment means; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!