Molds & Tooling
4 조회수
PPS Warpage Deformation
문제 현상
Warpage out of tolerance after demolding.
원인 분석
Uneven mold temperature makes crystallization shrinkage inconsistent; PPS's high crystallization characteristic is sensitive to temperature differences; fiber orientation also causes anisotropy.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Balance mold temperature; ②optimize cooling water channels; ③adjust gates to balance fiber orientation; ④improve mold temperature uniformity.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PPS warpage relies on mold temperature uniformity and orientation management; temperature difference control of high-temperature molds is the difficulty.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!