Material Analysis
11 조회수
PPS Regrind Usage Ratio
문제 현상
After blending in regrind, part strength decreases, black specks increase, and customer inspection fails
원인 분석
The thermal history of PPS regrind degrades performance; the conventional regrind ratio does not exceed 25-30%; when UL certification is required, regrind is limited to within 25%; regrind must be fully dried and clean
해결 방법
①Control the regrind ratio within 25-30%; ②Regrind ≤25% for UL-certified parts; ③Dry regrind before use and verify by batch; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PPS regrind management has clear ratio discipline; the 25-30% upper limit plus drying verification, stricter for UL parts; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!