Injection Molding
6 조회수
PP Injection Pressure 70-140
문제 현상
PP injection pressure 70-140MPa; thin-wall complex structure requirements; holding pressure management.
원인 분석
PP injection pressure 70-140MPa; increase for thin walls and complex geometry; holding pressure 50-70% of injection pressure; compensate shrinkage; dimensional accuracy; stress management.
해결 방법
①Injection pressure 70-140MPa; ②Increase for thin-wall complex parts; ③Holding pressure 50-70%; ④Dimensional accuracy; ⑤Stress balance.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
The medium-high range of PP injection pressure is the filling guarantee; the holding pressure ratio is standard; balance prevents stress.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!