Molds & Tooling
4 조회수
PP Glass Fiber Reinforced Processing
문제 현상
[Problem Phenomenon] Using the pure-material process for glass fiber PP, floating fiber and filling problems coexist
원인 분석
Glass fiber PP viscosity rises, requiring higher melt temperature and mold temperature; lower screw speed to protect fibers; wear requires wear-resistant configuration; shrinkage decreases but with anisotropy; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
해결 방법
Take the upper limit of melt temperature and mold temperature for glass fiber grades; reduce rotation speed; wear-resistant barrel; raise temperature first for floating fiber; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
For PP glass fiber material, upper-limit temperature and reduced speed, wear-resistant equipment; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!