Processing Machinery
3 조회수
PP Back Pressure and Screw Speed
문제 현상
[Problem Phenomenon] Improper PP back pressure and rotation speed cause uneven plasticizing or degradation
원인 분석
PP back pressure 5-15MPa ensures uniform plasticizing; medium screw speed avoids shear overheating; PP is relatively insensitive to shear but excessive speed still degrades; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
해결 방법
Back pressure 5-15MPa; medium screw speed; increase external heat if plasticizing is insufficient; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
PP back pressure 5-15MPa and medium screw speed; shear overheating also degrades; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!