Processing Machinery
3 조회수
Wall Thickness Design of PS Products
문제 현상
Improper wall thickness design triggers a series of defects.
원인 분석
Sudden wall thickness changes in PS cause stress concentration and sink marks; too thin results in insufficient strength.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience; This mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
해결 방법
①Uniform wall thickness design; ②Gradual transitions; ③Design ribs in proportion; ④Use rounded corners.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Structural design is the starting point of defect prevention; uniformity and gradual transition are the principles.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence; Include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!