Molds & Tooling
3 조회수
Contamination by Decomposed Material After PSU Shutdown
문제 현상
When production resumes after PSU shutdown, products show black specks, impurities and abnormal performance; residual decomposed material in the barrel was not completely removed.
원인 분석
PSU-type materials are temperature sensitive; residual melt in the barrel decomposes after shutdown; in discontinuous production, the melt retained in the barrel has decomposed, and continuing production without clearing it injects it into the cavity forming impurities.
해결 방법
①After shutdown, purge the decomposed material from the barrel before '2079851475616104452; ②Clean the barrel promptly; ③It is recommended to clean the barrel with AS, PS, PP and other materials; ④Lower the temperature during long shutdowns.
핵심 요약
The core of PSU shutdown management is thorough removal of decomposed material; the choice of purging material is particular; the purge amount when resuming production must be sufficient.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!