Material Analysis
11 조회수
PTFE Sintering Opacity
문제 현상
PTFE products have insufficient transparency after sintering, parts that should be transparent become white and cloudy, and appearance and inspection performance are affected.
원인 분석
Too low sintering temperature means resin particles are not fully melted and fused; too short holding time means melt penetration is incomplete; but the premise of increasing temperature and extending time is good resin thermal stability.
해결 방법
①Confirm good resin thermal stability; ②Appropriately increase the sintering temperature; ③Appropriately extend the holding time; ④Fix the process after verifying transparency meets standards.; After adjustment, continuously sample to verify the effect, confirm stability before resuming mass production
핵심 요약
PTFE sintering opacity is a signal of insufficient temperature and time; but the premise of adjustment is resin thermal stability; transparency verification should be included in inspection.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!