Extrusion & Post
11 조회수
PVC Extrusion Output Decline
문제 현상
Output gradually decreases, plasticization worsens.
원인 분석
Screw and barrel wear (PVC fillers are highly abrasive), screen pack blockage; PVC contains many fillers, wears faster; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based solely on experience.
해결 방법
①Measure screw—barrel clearance, replace if exceeding standard; ②Use wear-resistant material screw and barrel; ③Replace screen pack and monitor pressure differential; ④Stabilize feeding (forced feeding/stirring to prevent bridging); ⑤Establish regular screw and mold wear monitoring system.
핵심 요약
PVC output decline = 'wear + screen blockage': PVC fillers are highly abrasive, screw life is short; wear-resistant materials and regular clearance measurement are the hardware basis for maintaining output; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!