Blow Molding
7 조회수
PVC vs ABS Comparison
문제 현상
Insufficient toughness after replacing ABS electrical housings with PVC
원인 분석
PVC toughness is lower than ABS and its processing window is narrow, making thin-wall housings difficult to mold; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
해결 방법
Choose ABS/PC for electrical housings; use PVC where corrosion resistance and flame retardancy are prioritized; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
PVC and ABS are divided by toughness and corrosion resistance; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!