Material Drying
4 조회수
PVDF Bubbles Caused by Confusion of Drying Parameters
문제 현상
【Problem phenomenon】PVDF dried at 80-100℃ according to other materials still shows bubbles and silver streaks, and the inconsistent parameters leave one at a loss
원인 분석
Different sources give different parameters such as 80℃×4h, 80-100℃×2-4h, 120-150℃×2-4h; the commonality is that moisture must be reduced below 0.05%; when the temperature is insufficient or the time is not enough, residual moisture forms bubbles in the melt
해결 방법
Set drying parameters based on the resin supplier's data sheet, and accept moisture content below 0.05%; for thick-walled parts and appearance parts, strictly take the upper temperature limit; regularly calibrate the dryer's actual temperature and dew point
핵심 요약
Drying parameters are based on the resin supplier, with 0.05% moisture content as the acceptance line; do not rely on online hearsay experience; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!