Injection Molding
5 조회수
PVDF '2079851475616104452 Discoloration Troubleshooting Order
문제 현상
【Problem phenomenon】PVDF products turn from white to yellow and then to brown, changing gradually across multiple batches, making cause location difficult
원인 분석
Discoloration is a progressive signal of thermal degradation: temperature drift, excessive residence, nozzle overtemperature, and dead spot carbonization peeling can all cause it; systematic troubleshooting is required rather than blindly lowering temperature; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
Troubleshoot in order: measure each zone melt temperature → calculate residence time → check nozzle independent temperature control → clean the machine and check dead spot carbonized material; establish a discoloration grade comparison card to trace the trend
핵심 요약
Discoloration is a progressive alarm; troubleshoot systematically in the order of temperature, residence, nozzle, and dead spots; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; Include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!