Extrusion & Post
11 조회수
PVDF Additive Manufacturing Interlayer Bonding
문제 현상
【Problem Phenomenon】PVDF 3D printed parts have weak interlayer bonding, warpage and cracking, and low printing success rate
원인 분석
In FDM printing, if the extrusion temperature is too low, interlayer diffusion is insufficient and bonding is weak; higher temperature benefits bonding but dimensional accuracy decreases and there is HF release risk above 290℃; KTU research gives a 200-260℃ processing window
해결 방법
Take printing temperature values within 200-260℃ by weighing bonding strength against accuracy; control heat bed and environment temperature to reduce internal stress warpage; under no circumstances exceed 290℃ to prevent HF
핵심 요약
The PVDF printing window is 200-260℃, with interlayer strength and accuracy trading off against each other; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!