Extrusion & Post
11 조회수
Risk of Blending PVDF with Other Fluoroplastics
문제 현상
【Problem Phenomenon】When PVDF is blended and modified with other fluoroplastics, phase separation and delamination occur with uneven performance
원인 분석
PVDF has limited compatibility with most fluoroplastics; phase separation occurs when blending ratio and shear mixing do not match; blending modification must be based on compatibility data; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
해결 방법
Check compatibility literature and supplier data before blending; verify the phase structure in small-scale tests before scaling up; add compatibilizer and optimize the mixing process if necessary; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
For fluoroplastic blending, compatibility comes first; phase-separating formulations must not be forced through; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!