Injection Molding
5 조회수
PVDF '2079851475616104452 Flash and Clamping Verification
문제 현상
【Problem Phenomenon】PVDF thin-wall parts have flash at the parting line, and short shot reappears after reducing pressure, with an extremely narrow window
원인 분석
PVDF melt viscosity varies greatly with temperature; the superposition of high injection pressure demand and insufficient clamping margin narrows the process window; after mold wear, the flash threshold moves further down
해결 방법
Calculate the match between projected area and clamping force and leave margin; repair parting line wear; use a staged injection curve to find balance between preventing flash and ensuring filling; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
The coexistence of flash and short shot is a narrow window signal; check clamping and mold condition first; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!