Molds & Tooling
4 조회수
TPE Mold Sticking
문제 현상
TPE products stick to the cavity and are difficult to demold.
원인 분석
Mold temperature too high, holding pressure too large or too long, insufficient cooling time; mold surface finish mismatch (over-polished or too rough), insufficient draft angle, improper release agent use.
해결 방법
①Reduce mold temperature and holding pressure time; ②extend cooling time; ③adjust mold surface finish and draft angle; ④standardize release agent use.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Mold sticking is the most common problem in TPE '2079851475616104452; systematic troubleshooting from both process and mold aspects is needed, single adjustment is often ineffective.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!