Extrusion & Post
11 조회수
TPE Delamination (Material Contamination)
문제 현상
Layered peeling appears on the product surface.
원인 분석
Wrong resin remaining in the hopper, insufficient cleaning during material change, recycled material contamination or mixing; incompatible resin cannot fuse with the matrix forming a weak interface.; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
해결 방법
①Thoroughly clean the hopper and barrel; ②standardize the material change process; ③classified management of recycled material; ④check the cleanliness of the storage and conveying system.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Delamination mostly originates from material contamination; clean management and standardized material change are the root of prevention.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!