Molds & Tooling
4 조회수
TPE Product Ejection Deformation
문제 현상
Products deform or even tear during demolding.
원인 분석
TPE is soft and deforms when ejection force is concentrated; more likely to occur when cooling is insufficient and demolding temperature is high.; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
해결 방법
①Extend cooling to improve demolding strength; ②increase the ejection area to balance force; ③optimize ejector pin layout; ④appropriately reduce mold temperature.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Ejection of soft materials must disperse the force; sufficient cooling is the foundation.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!