Molds & Tooling
4 조회수
TPU product air traps
문제 현상
Gas marks and burnt appear at the end of the melt flow.
원인 분석
Poor venting compresses gas; high-speed filling aggravates air traps; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry materials and should be confirmed first during troubleshooting
해결 방법
①open vent grooves at the end; ②reduce injection speed; ③clean the vent grooves; ④optimize the gate position; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
The air trap position is where vents should be added; special attention must be paid to venting for high-speed filling of elastomers; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!