Material Drying
4 조회수
TPU drying 0.05% and defect rate
문제 현상
The defect rate of TPU products suddenly rose by 40%, and tracing found that the drying process was compressed
원인 분석
When TPU moisture exceeds 0.05%, the finished product defect rate rises by 40%; 0.05% is the warning line for general processing, '2079851475616104452 grades require stricter 0.02%, and extrusion grades also require 0.02%
해결 방법
①dry '2079851475616104452 to ≤0.02% and general to ≤0.05%; ②extrusion strictly 0.02%; ③batches with moisture content exceeding the standard are reworked as a whole batch and must not be released; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
The drying red lines of TPU are clearly graded: general 0.05%, '2079851475616104452 0.02%, extrusion 0.02%; compressing drying time is opening the gate to the defect rate
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!