Processing Machinery
4 조회수
TPU Back Pressure and Screw Speed
문제 현상
After increasing back pressure, plasticization improves but discoloration worsens; fast screw speed causes shear degradation
원인 분석
TPU back pressure and screw speed affect plasticization and shear heat; excessively high back pressure and speed overheat and degrade the melt; too low causes uneven plasticization and unstable metering; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
해결 방법
①Set back pressure and screw speed at medium-low; ②For poor plasticization, check temperature first rather than back pressure; ③When discoloration occurs, lower back pressure and lower speed; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
TPU plasticization management is temperature-primary, with back pressure and speed as auxiliary; shear heat is the invisible driver of discoloration and degradation; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!