Molds & Tooling
4 조회수
TPU Mold Temperature Management
문제 현상
TPU products stick to the mold during demolding and surface gloss is poor
원인 분석
Too high mold temperature makes soft TPU stick to the mold; too low gives poor surface replication; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
해결 방법
Mold temperature controlled at 20-70°C: soft material takes the low limit to prevent sticking, hard material takes the high limit to preserve gloss; uniform mold temperature; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
TPU mold temperature is set according to hardness and surface requirements; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!