Material Drying
5 조회수
TPU Bubble Cause Distinction
문제 현상
TPU product bubbles repeatedly appear and persist even after strengthened drying
원인 분석
TPU bubble causes: moisture, degradation, and air entrapment—three routes; treating only drying cannot cure the root cause; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
해결 방법
Empty-shot identification: for moisture bubbles check drying, for degradation bubbles check temperature and shear, for air entrapment check back pressure and venting; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
핵심 요약
TPU bubbles are identified by the three routes before treatment; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!