Material Drying
5 조회수
TPU Silver Streak Moisture Dominant
문제 현상
Radial silver streaks on the TPU product surface, with no obvious improvement after adjusting injection parameters
원인 분석
The vast majority of TPU silver streaks are caused by moisture: water vapor expands sharply during mold filling and breaks through the surface layer; machine adjustment has no solution for such silver streaks, and the only way out is to strengthen drying; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
해결 방법
①Check drying first: dew point and measured moisture content meet the standard; ②Check hopper moisture reabsorption; ③Consider other causes only after excluding moisture; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
When TPU shows silver streaks, suspect drying first; the three checks of dew point, moisture content and reabsorption are the fixed opening moves; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!