Injection Molding
3 조회수
Insufficient EEA injection flow length ratio
문제 현상
EEA injection flow length ratio only 80-100 below 150, thin-wall products cannot be filled
원인 분석
EEA melt viscosity high, short flow distance; injection temperature too low; insufficient injection pressure; large mold runner resistance
해결 방법
1) Increase injection temperature to 160-210°C; 2) Increase injection pressure to 80-100MPa; 3) Enlarge runner and gate sizes to reduce resistance; 4) Add 0.3-0.5wt% flow aid to reduce viscosity
핵심 요약
Insufficient flow length ratio is caused by EEA high viscosity; high temperature, high pressure and large gate are the key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!