Blow Molding
7 조회수
EVOH extrusion '2079851475616104457 parison sag is severe
문제 현상
EVOH extrusion '2079851475616104457 parison sag 20-40mm, causing bottle bottom wall thickness of only 0.3-0.4mm
원인 분석
EVOH melt strength low, parison stretches and thins under gravity; slow parison extrusion speed increasing sag time; parison temperature too high with low viscosity aggravating sag
해결 방법
1) Add slight crosslinking agent 0.3-0.5wt% to increase melt strength; 2) Increase parison extrusion speed to shorten sag time; 3) Reduce parison temperature by 10-15°C to increase viscosity; 4) Wall thickness controller to compensate sag
핵심 요약
Parison sag is caused by low melt strength; slight crosslinking and wall thickness control are key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!