Extrusion & Post
10 조회수
EVOH extrusion surface is rough
문제 현상
EVOH extruded product surface roughness Ra>5μm, exceeding requirements
원인 분석
Extrusion temperature too low <190°C with unstable melt flow; die inner wall rough or damaged; EVOH melt elasticity with uneven extrusion swell
해결 방법
1) Increase extrusion temperature to 190-230°C; 2) Polish die inner wall to Ra<0.4μm; 3) Reduce extrusion rate by 10-15%; 4) Add 0.3-0.5wt% external lubricant
핵심 요약
Surface roughness is caused by low-temperature extrusion and die defects; increasing temperature and polishing the die are core countermeasures
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!