Extrusion & Post
10 조회수
Rough surface of PVA extrusion
문제 현상
PVA extruded product surface roughness Ra>5μm exceeds the requirement
원인 분석
Extrusion temperature on the low side <140°C, melt flow unstable; die inner wall rough or damaged; PVA melt elasticity causes uneven extrusion swelling
해결 방법
1) Raise extrusion temperature to 140-200°C; 2) Polish die inner wall to Ra<0.4μm; 3) Reduce extrusion rate by 10-15%; 4) Add 0.3-0.5wt% external lubricant
핵심 요약
Rough surface is caused by low-temperature extrusion and die defects; raising temperature and polishing the die are the core countermeasures
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!