Molds & Tooling
4 조회수
Product has sink marks, unstable dimensions, or flash
문제 현상
The product has sink marks, unstable dimensions, or flash, related to the holding pressure setting
원인 분석
Holding pressure insufficient, producing sink marks
Holding pressure time too short, insufficient shrinkage compensation
Holding pressure too long, stress concentration at the gate area
Holding pressure switchover too early, dimension fluctuation
Holding pressure too high, flash
해결 방법
Increase holding pressure to 80-120MPa
Holding pressure time 15-30s, according to gate freezing time
Reasonably set the holding pressure switchover point
Avoid excessive holding pressure producing flash
Adjust holding pressure according to the cellulose acetate butyrate shrinkage rate 0.4-0.6%
핵심 요약
Holding pressure needs to be set according to shrinkage rate and gate freezing time
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!