Injection Molding
5 조회수
CEF injection gate freezing too early
문제 현상
The gate of the CEF injection molded part freezes within 0.5-1s during the holding pressure stage, the holding pressure cannot be transmitted, and the part shrinks severely
원인 분석
The gate size is too small, diameter <1mm, leading to rapid freezing; the injection temperature is low; the mold temperature is low, accelerating gate cooling
해결 방법
1) Increase the gate diameter to 1.5-2mm; 2) Increase the injection temperature to 160-220°C; 3) Increase the mold temperature to 40-50°C to delay gate freezing; 4) Holding pressure decays in steps rather than sudden release
핵심 요약
Early gate freezing is caused by small gate and low temperature; enlarging the gate and increasing the temperature are the fundamental measures
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!