Extrusion & Post
10 조회수
CEF extruder screw wear severe
문제 현상
After CEF extrusion for 200h, the wear of the screw and barrel reaches 0.5mm
원인 분석
The filler causes great wear to the screw; the screw material hardness is insufficient and not nitrided; the processing temperature is high, causing CEF to adhere to the screw and aggravate wear
해결 방법
1) Use a nitrided screw or a bimetallic screw SK-2 alloy; 2) Reduce the processing temperature to reduce adhesion wear; 3) Treat the filler with a coupling agent to reduce friction; 4) Regularly check the wear amount, replace in time if >0.3mm
핵심 요약
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are the key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!