Injection Molding
5 조회수
Warpage Deformation in CMC '2079851475616104452
문제 현상
After demolding, CMC injection molded products warp 2-3mm/100mm and the flatness does not meet the standard
원인 분석
CMC shrinkage is large and mold temperature is uneven, causing differential shrinkage in all directions; improper gate position causes uneven release of flow orientation stress; insufficient cooling time
해결 방법
1)Increase mold temperature to 40-60°C to reduce temperature difference; 2)Increase holding pressure 50-70MPa; 3)Optimize gate position for uniform flow; 4)Extend cooling time; 5)Annealing treatment to release residual stress
핵심 요약
Warpage is caused by differential shrinkage and orientation stress; uniform mold temperature and holding pressure are the key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!