Injection Molding
3 조회수
DSTDP injection insufficient flow length ratio
문제 현상
DSTDP injection flow length ratio only 80-100, below 150, thin-wall products cannot be filled
원인 분석
DSTDP melt viscosity high, flow distance short; injection temperature on the low side; injection pressure insufficient; mold runner resistance large
해결 방법
1) Raise injection temperature to 160-200°C; 2) raise injection pressure 80-100MPa; 3) enlarge runner and gate sizes to reduce resistance; 4) add 0.3-0.5wt% flow aid to reduce viscosity
핵심 요약
Insufficient flow length ratio is caused by DSTDP high viscosity; high temperature, high pressure and large gate are key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!