Thermoforming
4 조회수
Poor Electroplating/Spray Coating Adhesion of Biaxially Oriented Polypropylene Film Products
문제 현상
After electroplating or spray coating, the coating adhesion of the product is poor, and it is prone to blistering or peeling.
원인 분석
(1) The surface tension of the product is insufficient, and the coating is difficult to adhere
(2) There are release agent or oil residues on the product surface
(3) The internal stress of the product is large, affecting the coating adhesion
(4) The pretreatment before electroplating/spraying is insufficient
(5) The coating material does not match the base material
해결 방법
(1) Perform corona or flame treatment on the product surface
(2) Ensure the product surface is clean and free of release agent
(3) Reduce the internal stress of the product (annealing treatment)
(4) Strengthen the pretreatment (degreasing, roughening, etc.)
(5) Select a matching coating material
핵심 요약
The electroplating and spraying adhesion is determined by the surface energy and surface condition.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!