Extrusion & Post
4 조회수
Bending deformation of low density polyethylene extruded pipes
문제 현상
Pipe bends after extrusion, straightness out of tolerance.
Bending deformation affects pipe installation and use, especially prominent in long pipe production.
원인 분석
(1) Uneven cooling on each side along the extrusion direction, inconsistent shrinkage
(2) Haul-off device not concentric with the die
(3) Cooling water tank improperly installed or uneven water temperature
(4) Uneven pipe wall thickness causes different shrinkage in each direction
(5) Improper support after extrusion, pipe self-weight causes bending
해결 방법
(1) Check the cooling system, ensure uniform cooling on all sides of the pipe
(2) Align the haul-off device centerline with the die center
(3) Correct cooling water tank position, control uniform water temperature
(4) Adjust die and mandrel concentricity, ensure uniform wall thickness
(5) Add pipe support rollers, reduce self-weight deformation
핵심 요약
Pipe bending is caused by non-uniform cooling or haul-off eccentricity; it needs to be solved from cooling uniformity and equipment alignment.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!