Processing Machinery
4 조회수
Linear low density polyethylene extruder screw design mismatch (Variant: strengthened measures)
문제 현상
Uneven product plasticization, low output or high energy consumption; the screw does not match raw material characteristics.
Screw design directly affects plasticizing quality, output, and energy consumption.
In particular, additional attention is needed on the original basis; this problem is more prominent and requires key attention.
원인 분석
(1) Screw compression ratio does not match the density and melting characteristics of linear low density polyethylene
(2) Insufficient screw L/D ratio, inadequate plasticizing section length
(3) Improper design of the transition section between screw tip and die head
(4) Screw mixing elements not suitable for this material
(5) Improper screw flight depth design
(6) On the original basis, additional attention is needed as process parameter fluctuations or equipment status changes have aggravated this problem
해결 방법
(1) Select a screw compression ratio suitable for linear low density polyethylene, generally 2.5-4.0
(2) Screw L/D ratio at least 25:1, ensure full plasticization
(3) Optimize the transition section between screw tip and die head, eliminate stagnation zones
(4) Select appropriate mixing elements according to material characteristics (pins, barriers, etc.)
(5) Ask professional screw designers to optimize flight parameters according to material characteristics
(6) And strengthen process monitoring; on the original basis, additional attention is needed, with special attention to parameter stability
핵심 요약
Screw design needs to match material characteristics and product requirements; custom dedicated screws when necessary.
Targeted preventive measures need to be taken in different production scenarios.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!