Processing Machinery
4 조회수
Large barrel temperature fluctuation during linear low-density polyethylene linear low-density polyethylene processing (variant: strengthened measures)
문제 현상
The actual temperature of each barrel section deviates greatly from the set value, and melt quality fluctuates.
Temperature fluctuation causes instability in product dimensions, appearance and mechanical properties.
Especially, additional attention is needed on top of the original basis; this problem is more prominent and requires focused attention.
원인 분석
(1) Aging of heating bands leads to insufficient or uneven heating power
(2) Thermocouples are damaged or improperly installed, resulting in inaccurate temperature measurement
(3) Improper PID parameter settings of the temperature control instrument
(4) Cooling fan failure causes barrel overheating
(5) Large ambient temperature changes affect temperature control accuracy
(6) On top of the original basis, additional attention is needed as process parameter fluctuations or equipment condition changes aggravate this problem
해결 방법
(1) Check and replace aged heating bands to ensure uniform heating in each section
(2) Check thermocouple position and integrity, and replace damaged ones
(3) Optimize PID parameters of the temperature control instrument, with control accuracy of ±2°C
(4) Ensure the cooling fan works properly, and install air conditioning if necessary to maintain ambient temperature
(5) Install insulation covers to reduce heat loss
(6) And strengthen process monitoring; on top of the original basis, additional attention is needed to pay special attention to parameter stability
핵심 요약
Barrel temperature fluctuation is caused by heating or temperature control system failures; heating bands, thermocouples and temperature control instruments need regular inspection and maintenance.
In different production scenarios, targeted preventive measures need to be taken.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!