Processing Machinery
4 조회수
Uneven cutting end face of linear low-density polyethylene pipes (variant: strengthened measures)
문제 현상
The pipe end face has burrs, inclination or chipping after cutting.
Uneven cutting end faces affect pipe connection quality and may cause leakage in welding and socket connections.
Especially, additional attention is needed on top of the original basis; this problem is more prominent and requires focused attention.
원인 분석
(1) The cutting tool is worn or the cutting edge is not sharp
(2) Cutting speed is too fast or cutting pressure is too large
(3) Pipe temperature is too high, causing deformation during cutting
(4) The cutting machine is installed incorrectly, and the cutter is not perpendicular to the pipe
(5) Pipe wall thickness is uneven, causing uneven cutting force
(6) On top of the original basis, additional attention is needed as process parameter fluctuations or equipment condition changes aggravate this problem
해결 방법
(1) Replace or sharpen the cutting tool
(2) Adjust cutting speed and pressure to ensure smooth cutting
(3) Ensure the pipe is fully cooled before cutting
(4) Correct the cutting machine installation, with the cutter perpendicular to the pipe axis
(5) Ensure uniform pipe wall thickness
(6) And strengthen process monitoring; on top of the original basis, additional attention is needed to pay special attention to parameter stability
핵심 요약
Uneven cutting end faces are caused by tool wear or improper cutting parameters; tools need to be maintained and the cutting process optimized.
In different production scenarios, targeted preventive measures need to be taken.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!