Extrusion & Post
4 조회수
Uneven thickness of linear low-density polyethylene blown film
문제 현상
Film thickness fluctuates greatly in the circumferential or longitudinal direction, with thickness deviation exceeding ±10%.
Uneven thickness affects the mechanical properties and service performance of the film, and may cause deviation or film breakage on automatic packaging machines.
원인 분석
(1) Die gap is uneven
(2) Die temperature is uneven in the circumferential direction
(3) Air ring cooling is uneven
(4) Extrusion output fluctuates
(5) Haul-off speed is unstable
해결 방법
(1) Adjust the die gap, with circumferential error not exceeding ±0.01mm
(2) Check die heating bands to ensure circumferential temperature difference does not exceed ±3°C (190-250°C range)
(3) Check the air ring to ensure uniform air output, and clean the air ring regularly
(4) Stabilize extruder screw speed and temperature
(5) Stabilize haul-off speed and use a high-precision haul-off control system
핵심 요약
Uneven film thickness is caused by uneven die gap, temperature or cooling and needs to be solved from mold precision and process stability.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!