Injection Molding
5 조회수
Unstable cycle of general-purpose polyethylene '2079851475616104452
문제 현상
The '2079851475616104452 cycle time fluctuates greatly, and the cycle time difference of the same product exceeds ±3s.
Unstable cycle affects production efficiency and product quality consistency, and may cause abnormal part picking by the robot on automated production lines.
원인 분석
（1）The cooling time is improperly set, and the cooling degree of the product is inconsistent
（2）The demolding is unstable, and the ejection action is sometimes delayed
（3）The plasticizing time fluctuates, and the screw back time is inconsistent
（4）The mold temperature fluctuates greatly, and the cooling rate changes
（5）The equipment action sequence is unstable, and the hydraulic system responds slowly
해결 방법
（1）Ensure that the cooling time is sufficient and fixed, and use a timer for precise control
（2）Check the ejection system to ensure smooth ejector pin action, and add lubricating oil
（3）Stabilize the plasticizing parameters, and fix the screw speed and back pressure settings
（4）Stabilize the mold temperature, stabilize the water flow, and control the temperature difference within ±2°C (within the range of 30-80°C)
（5）Check the equipment hydraulic and electrical systems, and repair slow-responding valves and sensors
핵심 요약
Unstable cycle is caused by the accumulation of time fluctuations in each process, and the cooling, demolding, plasticizing, and equipment systems need to be investigated one by one.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!