Processing Machinery
4 조회수
Poor plasticization caused by screw wear of general-purpose polyethylene extruder
문제 현상
Unmelted particles appear in the product, the surface is rough, and the plasticization quality decreases.
Screw wear weakens the shearing and mixing effects, and the melt quality is unstable.
원인 분석
（1）The screw is worn after long-term use, and the clearance between the thread and the barrel increases
（2）The raw material contains hard fillers that accelerate wear
（3）The wear resistance of the screw material is insufficient
（4）The screw speed is too high, aggravating wear
（5）The barrel temperature is improperly set, and local overload occurs
해결 방법
（1）Check the screw wear, and repair or replace it if the clearance exceeds 0.2mm
（2）Select wear-resistant screw materials or bimetallic screws
（3）Reduce the screw speed for filler-containing raw materials
（4）Optimize the barrel temperature settings to ensure that each section is at a reasonable value within the range of 160-260°C
（5）Regularly maintain the screw and clean the attachments on the screw surface
핵심 요약
Screw wear leads to a decrease in plasticizing efficiency, and needs to be solved by selecting wear-resistant materials and regular maintenance.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!