Extrusion & Post
4 조회수
Cyclic pressure fatigue failure of heat-resistant polyethylene PPR pipes
문제 현상
PPR/PP-R pipes suffer fatigue failure in cyclic pressure tests, with cracks initiating from the inner wall and expanding outward.
Fatigue failure is the main failure mode of pipes in actual use.
원인 분석
(1) Micro defects on pipe inner wall cause stress concentration
(2) Unsmooth inner wall at welded joint causes stress concentration
(3) Pipe material toughness insufficient, fatigue cracks propagate fast
(4) Improper extrusion process parameters cause processing defects on pipe inner wall
(5) Pipe wall thickness design safety factor low
해결 방법
(1) Ensure the pipe inner wall is smooth and defect-free, inner wall Ra≤3.2μm
(2) Improve welding quality, avoid weld beads on the inner wall of joints
(3) Select materials with good toughness, ensure elongation at break >500%
(4) Optimize extrusion process, control inner wall quality
(5) Ensure pipe wall thickness reaches the SDR design value, select a higher SDR value if necessary
핵심 요약
Fatigue failure is caused by internal defects and stress concentration, and needs to be improved from the three aspects of pipe inner wall quality, welding quality and material toughness.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!