Extrusion & Post
4 조회수
Dimensional fluctuation of heat-resistant polyethylene extruded products
문제 현상
The outer diameter, wall thickness or width of the extruded product fluctuates periodically or randomly in the longitudinal direction.
Dimensional fluctuation affects the fitting accuracy and use performance of products, and is common in pipe and profile extrusion.
원인 분석
(1) Screw rotation speed unstable, output fluctuates
(2) Haul-off speed unstable, not matching extrusion speed
(3) Barrel temperature fluctuates greatly, melt viscosity changes
(4) Raw material feeding uneven, feeding fluctuation
(5) Cooling water temperature or flow fluctuation
해결 방법
(1) Check the extruder drive system, stabilize screw rotation speed
(2) Check the haul-off machine speed control system to ensure stable haul-off speed
(3) Stabilize barrel temperature, fluctuation controlled within ±3°C (190-230°C range)
(4) Check hopper feeding to ensure continuous and uniform feeding
(5) Stabilize cooling water temperature and flow, add a constant temperature device if necessary
핵심 요약
Dimensional fluctuation is caused by unstable extrusion or haul-off, and each process parameter needs to be systematically stabilized.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!