Processing Machinery
4 조회수
Polyolefin plastomer polyolefin plastomer processing barrel temperature fluctuation is large (Variant: Enhanced Measures)
문제 현상
The actual temperature of each section of the barrel deviates greatly from the set value, and the melt quality fluctuates.
Temperature fluctuation causes unstable product dimensions, appearance, and mechanical properties.
In particular, additional attention is needed on the original basis; this problem is more prominent and requires focused attention.
원인 분석
（1）Aging of the heating ring causes insufficient or uneven heating power
（2）The thermocouple is damaged or improperly installed, making temperature measurement inaccurate
（3）The PID parameters of the temperature control instrument are improperly set
（4）Cooling fan failure causes the barrel to overheat
（5）Large changes in ambient temperature affect temperature control accuracy
（6）On the original basis, additional attention is needed: fluctuations in process parameters or changes in equipment status have aggravated this problem
해결 방법
（1）Check and replace aging heating rings to ensure uniform heating of each section
（2）Check the position and integrity of the thermocouples and replace damaged ones
（3）Optimize the PID parameters of the temperature control instrument, with control accuracy of ±2°C
（4）Ensure the cooling fan works normally, and install air conditioning to maintain the ambient temperature when necessary
（5）Install insulation covers to reduce heat loss
（6）And strengthen process monitoring; on the original basis, additional attention is needed to pay special attention to parameter stability
핵심 요약
Barrel temperature fluctuation is caused by heating or temperature control system failure, and the heating rings, thermocouples, and temperature control instruments need to be regularly inspected and maintained.
Targeted preventive measures need to be taken in different production scenarios.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!