Extrusion & Post
5 조회수
Melt flow rate mismatch of raw materials for polyolefin plastomer extrusion
문제 현상
After using a certain batch of raw material, the extrusion process parameters need to be greatly adjusted, and the product quality fluctuates.
MFR mismatch makes the original process parameters inapplicable, affecting production efficiency.
원인 분석
（1）The raw material MFR is too low, the extrusion energy consumption is large, and the output is low
（2）The raw material MFR is too high and the mechanical properties of the product decline
（3）Different grades of raw materials are mixed and the MFR is inconsistent
（4）The raw material is stored for too long and the MFR changes
（5）The MFR fluctuates greatly between batches of raw materials
해결 방법
（1）Select extrusion grades with suitable MFR; polyolefin plastomer extrusion usually selects MFR 0.3-5g/10min
（2）Test the MFR of each batch of raw material to match the process requirements
（3）Avoid mixing different grades; if they must be mixed, do a test first
（4）Use the raw material within the shelf life
（5）Appropriately raise the barrel temperature when the MFR is too low
（6）Appropriately lower the barrel temperature when the MFR is too high
핵심 요약
MFR mismatch needs to be solved by selecting suitable grades and adjusting temperature parameters.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!