Extrusion & Post
6 조회수
Dimensional fluctuation of polyolefin plastomer extruded products
문제 현상
The outer diameter, wall thickness, or width of the extruded product shows periodic or random fluctuations in the longitudinal direction.
Dimensional fluctuation affects the fitting accuracy and service performance of the product and is common in pipe and profile extrusion.
원인 분석
（1）The screw speed is unstable and the discharge output fluctuates
（2）The hauling speed is unstable and does not match the extrusion speed
（3）The barrel temperature fluctuates greatly and the melt viscosity changes
（4）The raw material feeding is uneven and the feeding fluctuates
（5）The cooling water temperature or flow rate fluctuates
해결 방법
（1）Check the extruder drive system and stabilize the screw speed
（2）Check the speed regulation system of the haul-off machine to ensure stable hauling speed
（3）Stabilize the barrel temperature, with the fluctuation controlled within ±3°C (180-230°C range)
（4）Check the hopper feeding to ensure continuous and uniform feeding
（5）Stabilize the cooling water temperature and flow rate, and add a constant temperature device when necessary
핵심 요약
Dimensional fluctuation is caused by unstable extrusion or hauling, and all process parameters need to be systematically stabilized.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!