Extrusion & Post
8 조회수
Uneven thickness of polyolefin plastomer blown films
문제 현상
The film thickness fluctuates greatly in the circumferential or longitudinal direction, and the thickness deviation exceeds ±10%.
Uneven thickness affects the mechanical properties and service performance of the film, and may cause deviation or film breakage on automatic packaging machines.
원인 분석
（1）The die gap is uneven
（2）The temperature in the circumferential direction of the die is uneven
（3）The air ring cooling is uneven
（4）The extrusion output fluctuates
（5）The hauling speed is unstable
해결 방법
（1）Adjust the die gap, with the circumferential error not exceeding ±0.01mm
（2）Check the die heating ring to ensure the circumferential temperature difference does not exceed ±3°C (180-230°C range)
（3）Check the air ring to ensure uniform air output, and clean the air ring regularly
（4）Stabilize the extruder screw speed and temperature
（5）Stabilize the hauling speed, using a high-precision hauling control system
핵심 요약
Uneven film thickness is caused by uneven die gap, temperature, or cooling, and needs to be solved from mold precision and process stability.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!