Extrusion & Post
11 조회수
Ovality of polyolefin plastomer pipes exceeding the standard
문제 현상
The pipe cross section is not round and the ovality exceeds the tolerance.
Excessive ovality affects pipe connection and installation, and may cause leakage in socket connections and mechanical connections.
원인 분석
（1）Uneven cooling causes inconsistent shrinkage in all directions of the pipe
（2）The sizing sleeve is worn or installed incorrectly
（3）The clamping force of the haul-off machine is too large, causing pipe deformation
（4）Improper stacking of pipes causes deformation
（5）The cooling water temperature is too high, causing the pipe to soften and deform
해결 방법
（1）Check the cooling system to ensure uniform cooling in all directions of the pipe
（2）Check the sizing sleeve; replace it if worn, and ensure concentric installation
（3）Adjust the clamping force of the haul-off machine to avoid excessive force
（4）Use special storage racks for pipes to avoid stacking deformation
（5）Control the cooling water temperature at 15-25°C
핵심 요약
Excessive ovality is caused by uneven cooling or external force deformation, and needs to be solved from cooling uniformity and pipe storage.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!