Injection Molding
11 조회수
Large Creep Deformation of Polypropylene Injection-Molded Products
문제 현상
The product undergoes slow deformation under long-term load, and the deformation gradually increases over time.
Creep deformation affects the dimensional stability and service life of the product, and is especially critical in long-term load-bearing products.
원인 분석
(1) The crystallinity of polypropylene is low, and the molecular chains easily slip, resulting in large creep
(2) The wall thickness of the product is insufficient, and the high stress level accelerates creep
(3) The service temperature is too high; when approaching the glass transition temperature of the material, the creep rate increases
(4) The molecular weight of the material is low, and the creep resistance is poor
(5) The product design does not consider the long-term creep allowance
해결 방법
(1) Increase the mold temperature to the higher value within the range of 40-90°C to increase crystallinity
(2) Increase the wall thickness of the product or add reinforcing ribs to reduce the service stress level
(3) Control the service temperature within the long-term temperature resistance range of the material
(4) Select a high molecular weight grade or add reinforcing materials to improve creep resistance
(5) Consider the creep allowance during product design, and reserve the creep deformation amount in the initial dimensions
핵심 요약
Creep deformation is an inherent characteristic of crystalline materials under long-term load, and needs to be controlled by increasing crystallinity, reducing stress, and selecting suitable materials.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!